Our Business

Jax Services was established to better serve those with industrial coating needs. This was done, in response to increased frustration with some of the leading industrial coating establishments poor lead times, lost product, and deteriorating quality of work.  We are committed to finding a resolution.

Combined, we have over 20 years of experience in the industrial and HVAC/R communities. We researched many protective coatings for HVAC/R coils and equipment in extreme humid and corrosive environments and found CARBOLINE’S CARBOTHANE 134 HG to deliver the superiority we are looking for. In addition to providing superior coatings, we are absolutely dedicated to a thorough but rapid turn around with lead times not exceeding 3-4 days in most cases. We also provide same day pick up of the product to be coated and delivery once the project is completed. Finally, we can offer all of these services at a truly competitive price.

Why JAX?

All coatings aside, the product used to protect a coils’ surface is only as good as the surface preparation and application process itself. At Jax, our process is tedious and we don’t mind.

• We straighten any misaligned fins and inspect the equipment for any hidden damage.
• We hand wash and clean all surfaces to be coated.
• Next, we degrease the coil so that the coating will adhere to the surface for maximum durability and flake resistance.
• After the unit is dry from the cleaning process we tape off any important data plates to make reading critical information easier on the contractor.
• Now, we are ready to prime the surface. We use a self-etching primer with outstanding adhesion to metals such as aluminum and copper for outstanding stability.
• At Jax we don’t just throw primer into a gun and start spraying, we actually hand paint all copper elbows and aluminum fins that are difficult to reach using standard techniques (i.e. spray gun or submersion) to ensure maximum coverage. Remember: Your coating is only as good as your coverage!
• After we hand paint the hard to reach areas with primer we spray not only the rest of the designated coil but also all copper, compressors, and skid at no extra cost.
• Finally, the Carbothane 134 HG topcoat is applied. Carbothane is metallic filled polyurethane that is less permeable than others allowing for exceptional resistance to corrosion and industrial fall out. (For more info read: Why Carbothane?)
• We use the exact same process for the topcoat as we do with the primer, hand painting all hard to reach surfaces, then spraying the remainder of the coil, copper, compressors, and pan.
• The topcoat process is repeated twice, to once again, ensure maximum coverage all the while having a minimal effect on the head pressure. Not only does it protect the surface but the final coat makes it appeasing to the eye as well.
• Finally, we allow for the coat to fully cure, and then deliver it to your door at no extra cost.

How long does this process take?

A typical lead time for Jax is 3-4 days!

At Jax we take pride in what we do. We treat each and every coil as if it were going on our on home, so that our customers know their product comes first and never gets lost in the shuffle.

So, why rely on Jax for your coil coating needs?

Because we employ a philosophy that uniquely combines quality work using superior products, efficient turn around, and impeccable customer service. Let us prove it to you and earn your business!